3595 4U with Impviewer

£1,950.00

Category:

Description

The 3595-4U interface replaces the 3595-4B and 3595-4C interface cards that were needed to allow an IMP SNET network to communicate with a host PC. The 3595-4U communicates via the PC’s USB interface.

This means that, for the first time, IMPs can be interfaced with a laptop rather than a desktop computer, opening up a wide range of additional applications.

The 3595-4U eliminates the cost of replacing existing IMPs and S-Net networks when upgrading PCs and software. Using ScadaPro, multiple Imp S-Net networks can be supported by multiple 3595-4U systems attached to the one PC.

All communication and power connections are made via standard plugs and sockets on the front and rear panels of the unit.

     Front Panel                                                        Rear Panel

 

 

 

Features

  • Connects an IMP SNET network to a PC USB input.
  • Allows use of laptops with IMPs for the first time.
  • External IMP power supply.
  • Works with multiple interfaces supported by ScadaPro.

Specifications

Inputs

  • Power requirement: 24-48Vdc
  • External Power Supply connection: Panel mounted 9 pin D sub plug

Network Cable Details

  • Cable Spec: Screened single pair cable 100 Ohm impedance. 12-24AWG depending on network = length/number of IMPs
  • Maximum No. IMPs: 50

Operating Conditions

  • Temperature range: -20°C to +50°C
  • Relative humidity: (0 – 40°C) <90%

Mechanical

  • Casing: Aluminium sealed to IP5
  • Size (w x d x h): 170 x 116 x 36mm
  • Weight: 2kg

 

Downloads

User Manual: [User Manual]

Firmware Programming Software: [Firmware Software]

3595-4U VIRTUAL COM PORT DRIVERS: [Drivers]

IMPViewer Software: [Software]

3595 4U with Impviewer
£1,950.00