3595 9D2 Wall mount dual Ethernet to SNET interface

€ - POA

Category:

Description

The 3595-9X Interface series replaces the 3595-9A, 3595-9B, 3595-9D series of interface units that were needed to allow an IMP SNET network to communicate with a host PC over Ethernet.

This means that IMPs can be interfaced with any type of computer irrespective of the operating system, opening up a wide range of additional applications.

The 3595-9X series eliminates the cost of replacing existing IMPs and S-Net networks when upgrading Pcs and software.

All communication and power connections are made via standard plugs and sockets on the panels of the unit.

Additional information

Format

3595-9D1 Wall Mount Interface, 3595-9E Compact Dekstop Interface, 3595-9A1 Rack Mount Interface

Specifications

External Connectors, Switches and Indicators

1xIEC Power Connector with on/off switch and fuse rated to IP40
1x10A Inlet Fuse rated to IP68
2xS-Net Female connectors with IP65 Covers
2xS-Net Terminator switches external
1x100M RJ45 Ethernet Connector with IP65 Covers
1x1000M RJ-45 Ethernet Connector with IP65 Covers
1xUSB Serial Console Port with IP65 Covers
1xUSB Serial Debug Port with IP65 Covers
LED Indicators: 1xGreen Power indicator at base
2x Red Host Power on RHS
2x Red Host Comms on RHS
2x Red SNet Comms on RHS
2x Red SNET Power on RHS

Power

Input Voltage: 85-264 VAC
Input Frequency: 47-63 Hz

Operating Enviroment

Operating Temperature:0 – 50°C
Relative Humidity: (0 – 40°C) < 90%

SNET Cable

Screened single pair cable 100 OHM impedance.
12-24AWG depending on network length and number of IMPs.

Software

Protocol: TCP/IP compatible with original Solartron 3595-9X Series
TCP/IP Connection Port: 1234
Maximum Throughput: 850 results per second per SNet

Mechanical

Dimension including flange 400mmx273mx145mm
Mounting holes fully compatible with original 3595 9D
Casing powder coated steel sealed to IP55 and meets IK07
Weight 8.3kg
Dual key locking mechanism

Standards Compliance

  • EN 61000-4-3
  • EN 61000-4-6
  • EN 61000-4-11
  • EN 61000-6-4
  • EN 61000-6-5
  • IEC 61131-2
  • IEC 61439-1

Downloads

IMPViewer Software: [Software]