3595-1Q1 – 20 Channel Analogue Reed Relay IMP Replacement of 3595-1H IMP

No longer available. For information purposes only.

Category:

Description

The 3595-1Q1 is an enhanced version of the 3595-1C1, which includes 3 and 4 terminal resistance and RTD measurement facilities organised in a similar way to the original 3595-1H IMP. All 20 channels are available to use in pairs for the 3 and 4 wire measurement modes.

The channels of the 3595-1Q1 are fully programmable and so each 3 or 4 wire measurement takes up2 channels but leaves the rest available for other 3595-1C measurement modes are programmed using the same codes as a 3595-1H. The connector wiring for the 3 and 4 terminal resistance modes differs a little from the 3595-1H, but otherwise, the 3595-1Q is compatible with the measurement modes of the 3595-1H analogue channels.

Features

  • Compatible Communications with 3595 series.
  • Compatible enclosure and connector blocks.
  • Thermocouple, resistance, RTD, voltage and current measurements in rugged enclosure.
  • 20 Channels per Module – precision reed relay isolation. Individually programmable.
  • Precision 3 and 4 wire resistance and RTD measurements. (3595-1Q1)
  • Enhanced 14 to 19/20 bit resolution. 100 to 10 measurements per second.
  • Enclosed connector blocks. Dual sensor accurate Cold Junction Compensation.
  • Thermocouple health monitoring Temperatures in °C or °F unit.

Specifications

Number of channels / module: 20/10

Number of poles / channel: 3/6

Connector type input channels: Standard 3595 series, Isothermal Enclosure, Screw Terminals.

Current Measurement

Sensitivity ( 100R shunt fitted): <10nA

Accuracy as for voltage ranges + shunt accuracy.

A-D Converter

Measurement resolutions supported:

19/20 bits at 9 measurements/s
18/19 bits at 20 measurements/s
17 bits at 30 measurements/s
15 bits at 80 measurements/s
14 bits at 100 measurements/s
A number of bits includes a sign counted as 1 bit.
50 Hz Mains frequency interference rejection is provided by 17 and 20-bit modes 60 Hz mains interference rejection is provided by 17,19 and 20-bit modes.

Higher Measurement rates possible by disabling drift correct measurements.

Interference Rejection

AC 50/60Hz

Common mode rejection ratio channel group: <0.1uV/V

Single-channel common-mode rejection ratio: <1uV/V

Series mode rejection ratio 50 or 60 Hz +/- 0.05%: <1uv/V

Note: reed scanners are not suitable for direct connection to power circuits.

Voltage Measuring Mode

Input voltage ranges:

+12V>-12V

+2,0V >-2.0V

+200mV >-200mV

+30mV >-30mV

Automatic range selection is supported.

Temperature coefficients DC voltage: 25ppm rdg + 0.1uV/o C

Measurement sensitivity 30mV range 18 bits: <0.25uV

Additional error at 80 & 100/sec mode 0.03% of range.

Overload Protection

Channel overload protection: Passive 50V Continuous

Isolation

For protection against transients and ground loops.

Isolation test voltage IMP to IMP or to SNET: Tested at 500V

Power Requirement

Connector: Via SNET cable

Voltage: 11 to 48V

Current: <100mA at 12V, <50mA at 24V

Thermocouple Measurement Accuracy

Internal Cold junction compensation errors included: (External compensation is also available)

TypeRangeAccuracy
K-100 to 5000.05°C
500 to 12000.7
J1200 to 16003.0
360 to 8000.5
T-150 to 4000.7
R0 to 16000.5
S0 to 17002.0
E-50 to 2902.2
290 to 10000.7
B200 to 16001.0
N-200 to 16004.5
-100 to 5801.1.5
80 to 13001.3

Displayed sensitivity: <0.1oC

Thermocouple Health Monitoring automatic by resistance measurement sequence.

Measurement modes: V DC (mV, DC, uVDC) Thermocouple CJC temperature, Sensor health.

Thermocouple types: K,J,T,R,S,E,B,N

Thermocouple compensation: Dual sensors

3595-1Q1 only: 3&4 wire resistance, 3&4 wire PT100.

Current Measurement

Sensitivity ( 100R shunt fitted): <10nA

Accuracy as for voltage ranges + shunt accuracy.

A-D Converter

Measurement resolutions supported:

19/20 bits at 9 measurements/s
18/19 bits at 20 measurements/s
17 bits at 30 measurements/s
15 bits at 80 measurements/s
14 bits at 100 measurements/s
A number of bits includes a sign counted as 1 bit.
50 Hz Mains frequency interference rejection is provided by 17 and 20-bit modes 60 Hz mains interference rejection is provided by 17,19 and 20-bit modes.

Higher Measurement rates possible by disabling drift correct measurements.

Interference Rejection

AC 50/60Hz

Common mode rejection ratio channel group: <0.1uV/V

Single-channel common-mode rejection ratio: <1uV/V

Series mode rejection ratio 50 or 60 Hz +/- 0.05%: <1uv/V

Note: reed scanners are not suitable for direct connection to power circuits.

Voltage Measuring Mode

Input voltage ranges:

+12V>-12V

+2,0V >-2.0V

+200mV >-200mV

+30mV >-30mV

Automatic range selection is supported.

Temperature coefficients DC voltage: 25ppm rdg + 0.1uV/o C

Measurement sensitivity 30mV range 18 bits: <0.25uV

Additional error at 80 & 100/sec mode 0.03% of range.

Overload Protection

Channel overload protection: Passive 50V Continuous

Isolation

For protection against transients and ground loops.

Isolation test voltage IMP to IMP or to SNET: Tested at 500V

Power Requirement

Connector: Via SNET cable

Voltage: 11 to 48V

Current: <100mA at 12V, <50mA at 24V

Thermocouple Measurement Accuracy

Internal Cold junction compensation errors included: (External compensation is also available)

TypeRangeAccuracy
K-100 to 5000.05°C
500 to 12000.7
J1200 to 16003.0
360 to 8000.5
T-150 to 4000.7
R0 to 16000.5
S0 to 17002.0
E-50 to 2902.2
290 to 10000.7
B200 to 16001.0
N-200 to 16004.5
-100 to 5801.1.5
80 to 13001.3

Displayed sensitivity: <0.1oC

Thermocouple Health Monitoring automatic by resistance measurement sequence.

Downloads

Install Guide: [IMP Install Guide]

Terminal Resistance Modes: [File]